How to choose the correct indoor fixed installation LED displays ?
Here are 5 key points you should consider before you have a decision.
View angles is deciding how many audience can view the LED screen clearly . Wider view angle , more people can view it . So it can make your cost and advertising maximization . The view angle is cause by encapsulation of the LEDs , therefore , if you have enough budget , choose the better encapsulation of the LED, and also take care of the mask covering the LED board.
Someone must noticed if the brightness is too high , it's hard for our eyes , but if too low , the screen will not clear enough. So the standard brightness for indoor LED display is 600-1000 nits.
Bad flatness will absolutely make the effect of the LED screen worse , and the standard flatness is keeping ±1 mm . Our fine pitch LED display flatness reach to ±0.2 mm. So , when we are making the solution , die-casting aluminum cabinet will be the best for indoor LED displays .
4. The LEDs
There are two type of LEDs for indoor , white SMD LED and black SMD LED , the black LEDs we are using mostly for the pixel pitch which is lower than 5mm , and we have to choose the black LEDs for indoor LED screen , this is a very important point. All our LED black face LED.
5. Dead pixels
The LED screen are made with so many small pixel LEDs , less dead pixels , better effect . It is also according to the technology and original material , when you asking the price , make sure the original material is what you need . it is better to be a brand company.